Prepare Metal Blank
1 hourClean copper or fine silver blank free of oxide and grease.
Beginner1-2 weeks
Enamel Sifted Base Coat Guide
Learn enamel sifted base coat from scratch with a clear step-by-step workflow, recommended tools, safety guidelines, and expert tips.
enamel beginnersjewelry makers
Workflow
Apply Counter Enamel
1 hourWet pack or sift counter enamel on back to prevent warping.
Sift Top Coat
30 minSift transparent or opaque enamel through 200 mesh onto front.
Fire in Kiln
30 minFire at 1450–1500°F until glossy smooth — 1–3 minutes typical.
Tools Used
Checklist
0 / 6 completedLoading your checklist…
Planning
Preparation
Baseline
Quality
Tracking
Reference Materials
Sifted Base Coat StandardStandard
Industry best practices for sifted base coat in enameling.
Sifted Base Coat FormulaFormula
Key ratio or calculation used throughout sifted base coat.
Sifted Base Coat ReferenceTable
Quick reference values for sifted base coat.
| Enamel | Temp °F | Time |
|---|---|---|
| Transparent | 1450 | 2 min |
| Opaque | 1500 | 2 min |
Counter First
Skipping counter enamel causes warping on copper every time.
Even Sift
Hold sifter 6 inches above for uniform coverage.
Clean Metal
Oil fingerprint fires as black spot permanently.
Safety Notes
- Kiln and hot pieces cause severe burns — use long tongs.
- Enamel dust is glass — wear respirator when sifting.