Pattern and Cut Panels
1 hourCalculate panel sizes and leather yield from hide.
Beginner1 weekend
Leather Wallet Project
Complete guide for leather wallet project — step-by-step workflow, tools, checklist, and expert tips to get started.
leather beginnersEDC makersgift crafters
Workflow
Bevel and Burnish Edges
1 hourSet bevel angle and burnishing technique.
Saddle Stitch Assembly
3 hoursCalculate thread length and stitch spacing.
Apply Finish and Edge Coat
30 minutesEstimate dye coverage on small panels.
Tools Used
- Wallet Panel Sizing CalculatorPrimary
Size wallet panels for card slots and fold.
- Saddle Stitching Thread CalculatorPrimary
Calculate thread length for perimeter stitch.
- Leather Area Yield CalculatorSupporting
Optimize hide layout for minimal waste.
- Stitching Spacing CalculatorReference
Set consistent stitch pitch.
Checklist
0 / 6 completedLoading your checklist…
Planning
Prep
Baseline
Quality
Tracking
Reference Materials
Wallet Leather WeightsTable
Typical oz weights.
| Part | Weight | Notes |
|---|---|---|
| Exterior | 3–4 oz | Veg tan |
| Interior | 2–3 oz | Goatskin OK |
| Lining | 1–2 oz | Suede |
Thread LengthFormula
Thread = stitch length × 4 + tail allowance per seam.
Blade SafetyStandard
Cut away from body — round knife slips on dull blades.
Measure Twice
Verify all calculator inputs against physical measurements before cutting or mixing.
Quality Check
Compare results to known good references in leather before final assembly.
Stop If Unsafe
Pause immediately if tools malfunction, ventilation fails, or materials react unexpectedly.
Safety Notes
- Follow manufacturer safety data sheets for all chemicals and finishes.
- Work in ventilated area and wear appropriate PPE for the task.