Measure Stone and Select Setting
30 minutesCalculate seat diameter and bur size.
Intermediate2-4 weeks
Stone Setting Guide
Complete guide for stone setting guide — step-by-step workflow, tools, checklist, and expert tips to get started.
settersbench jewelerscustom ring makers
Workflow
Cut Seat or Build Bezel
2 hoursCalculate bezel strip length for round stones.
Set and Secure Stone
1 hourUse setter to tighten prongs or burnish bezel.
Inspect Security
20 minutesCheck stone does not rotate or rattle.
Tools Used
Checklist
0 / 6 completedLoading your checklist…
Planning
Prep
Baseline
Quality
Tracking
Reference Materials
Bezel Strip LengthTable
Length = π × (stone diameter + metal thickness).
| Stone mm | Strip mm | 26 ga |
|---|---|---|
| 5 | 16.5 | Silver |
| 6 | 19.5 | Silver |
| 8 | 26.0 | Silver |
Seat ClearanceFormula
Seat diameter = stone diameter − 0.05 mm for friction fit.
Flying stone chips cause eye injury — wear magnification and safety glasses.Standard
Secure work in ring clamp before setting.
Measure Twice
Verify all calculator inputs against physical measurements before cutting or mixing.
Quality Check
Compare results to known good references in stone before final assembly.
Stop If Unsafe
Pause immediately if tools malfunction, ventilation fails, or materials react unexpectedly.
Safety Notes
- Follow manufacturer safety data sheets for all chemicals and finishes.
- Work in ventilated area and wear appropriate PPE for the task.