Prep Small Blanks
1 hourCut copper or silver blanks sized for torch firing on tripod.
Intermediate2-4 weeks
Enamel Torch Fired Enamel Guide
Learn enamel torch fired enamel from scratch with a clear step-by-step workflow, recommended tools, safety guidelines, and expert tips.
jewelry enamelistssmall studio artists
Workflow
Sift Enamel on Blank
20 minSift thin even coat on front over counter-enameled piece.
Torch Fire from Below
5 min per pieceHeat from underside with soft flame until enamel flows glossy.
Repeat Layers
2 hoursAdd additional colors or layers with repeat sift and fire.
Tools Used
Checklist
0 / 8 completedLoading your checklist…
Planning
Preparation
Safety
Execution
Quality
Documentation
Reference Materials
Torch Fired Enamel StandardStandard
Industry best practices for torch fired enamel in enameling.
Torch Fired Enamel FormulaFormula
Key ratio or calculation used throughout torch fired enamel.
Torch Fired Enamel ReferenceTable
Quick reference values for torch fired enamel.
| Blank Size | Max | Tip |
|---|---|---|
| 1 in | Easy | Beginner |
| 2 in | Moderate | Intermediate |
Heat from Below
Direct flame on enamel surface scorches glass — always heat from back.
Penny Practice
US penny is free copper blank for torch enamel tests.
Quick Gloss
Over-firing even 10 seconds causes bubbles and burn-through.
Safety Notes
- Torch firing requires fire extinguisher and non-flammable surface.
- Hot enamel pieces look cool — use firing fork always.