Reproduce one source-labelled albumin-adjustment method for paired total calcium and albumin with explicit units, reference albumin and factor—without an ionized-calcium estimate or diagnosis.
Choose your path
Reproduce one de-identified, source-labelled albumin-adjustment method for paired total calcium and albumin without presenting the arithmetic as ionized calcium, a reference interval or diagnosis.
Trace the arithmetic without accepting a hidden 4.0/0.8 convention or an automatic normal/abnormal verdict.
Name the paired result record and controlling method, then copy its unit system, calcium, albumin, reference and factor.
Can reproduce the entered method while laboratory interpretation and clinical decisions stay external.
Prevent factors and reference values from being transferred between assays, units or locally different formulas.
Inspect the complete panel/method source cards, explicit unit basis and every method parameter in the output.
The result preserves method ownership and never claims to measure or estimate ionized calcium.
Understand how two documented formulas can yield different arithmetic without learning that either diagnoses calcium status.
Run separate de-identified education records with mg/dL/g/dL and mmol/L/g/L methods and compare the exposed steps.
Can explain the arithmetic, unit dependence and evidence limits without using a generic reference interval or treatment rule.
Outputs and checklists are planning aids. Review the linked current authorities and the records, terms, instructions, and requirements that apply to your exact situation before a consequential decision.
Tools you might need next
Audit one source-labelled same-panel anion gap with an explicit potassium formula and optional fully documented albumin adjustment—without a universal range or diagnosis.
Audit one source-selected Cockcroft–Gault equation record with an explicit formula-weight basis, SCr result and documented coefficient—without CKD staging or dose advice.
Audit documented IV volume-and-duration arithmetic in a separate pump mL/hour record or gravity drops/minute record without creating an order or administration instruction.
Reference albumin, correction factor and units belong to the controlling laboratory, protocol, publication or exercise. The tool never silently supplies 4.0 or 0.8 for a real record.
Adjusted total Ca = entered total Ca + entered factor × (entered reference albumin − entered albumin)A numeric factor is meaningful only in its documented calcium-per-albumin units. Do not transfer the same number between conventional and SI unit records.
mg/dL calcium ↔ g/dL albumin, or mmol/L calcium ↔ g/L albuminA large contemporary comparison found adjustment formulas can materially misclassify ionized-calcium categories. This tool supplies no reference interval, diagnosis, cause or treatment.
Method-adjusted total calcium ≠ measured ionized calciumUpdated: August 2026
Enter 8.2 mg/dL total calcium, 2.5 g/dL albumin and an exercise-documented 4.0 reference with 0.8 factor. The result 9.4 mg/dL reproduces that exercise only and receives no normal/abnormal label.
Select mmol/L calcium with g/L albumin and copy the formula's factor in mmol/L per g/L. A conventional-unit factor cannot be reused numerically.
The entered formula can produce a downward adjustment when measured albumin exceeds its documented reference. The signed arithmetic is retained without converting it into a clinical category.
Audit one de-identified albumin-adjustment calculation from a named source. Copy the paired total-calcium and albumin record plus the exact method units, reference albumin and factor; the result is method arithmetic, not a measurement of ionized calcium or a calcium-status verdict.