Reconcile measured whole and cut tile placements, verified offcut reuse, explicit spares, matching inventory, package size, and order remainder.
Choose your path
Reconcile reviewed whole/cut placements, verified offcut reuse, explicit spares, matching inventory and sellable packages without recommending a waste percentage.
Buy from a measured layout instead of a generic allowance.
Enter whole/cut placements, exact package size, matching stock and a deliberate repair reserve.
Sees individual need, sellable packages and package remainder as separate quantities.
Use specific reusable pieces without hiding assumptions.
Assign offcut credits to cut positions and enter verified pieces per new source tile.
Credits are bounded and the report shows remaining cut positions and new source tiles.
Retain product/lot and arithmetic provenance.
Record the dated takeoff, download the complete record and explicitly save its owned fields to Tile Project.
Can audit spares, on-hand tiles, package rounding and exclusions without a recommended percent.
Outputs and checklists are planning aids. Review the linked current authorities and the records, terms, instructions, and requirements that apply to your exact situation before a consequential decision.
This tool is part of these guided projects. Each project provides step-by-step instructions with checklists and all the tools you need in one place.
Tools you might need next
Count full and cut positions in a centered straight grid, compare a 90° rotation and reconcile new source tiles, inventory and whole-package cost.
Build a measured multi-area takeoff, compare exact carton coverage with a reviewed source-tile count, and price whole packages after matching inventory.
Reconcile straight-edge, obstacle, and specialty cut positions from a measured layout with verified offcut reuse and source-tile yield.
Cut yield and credits come from the reviewed cut schedule or a representative trial. The tool does not assign a percentage from pattern or room shape.
New cut sources = ceil((cut positions − verified offcut credits) ÷ verified cut yield)Spare tiles are a user-selected quantity. On-hand tiles must match the approved product, size, lot/shade-caliber needs and condition.
Purchase tiles = max(0, whole placements + cut sources + spare tiles − usable whole tiles on hand)Package remainder is reported separately from the individual-tile need; it is not renamed a recommended waste allowance.
Packages = ceil(purchase tiles ÷ tiles per package)Updated: August 2026
Reconcile 90 whole positions and 30 cut positions with assigned offcuts, an explicit five-tile reserve, existing matching stock and eight-tile boxes.
Compare one versus two verified cut pieces from a new source tile while retaining the same marked cut positions and source revision.
Download a complete record and explicitly save its source-owned fields to Tile Project without auto-importing unrelated dimensions or percentages.
Dry-layout the actual space and count placements, cuts, reuse and selected spares explicitly.
Keep individual need, sellable package rounding, stored spare tiles, verified reuse and actual discard as different records.
A pattern name cannot prove how much material your layout will consume. Start from a dated dry layout or takeoff, count whole and cut positions, document specific offcut reuse and spare tiles, then apply matching inventory and the supplier's exact package size.