Reconcile separate fixed-gap picket faces, complete straight cuts or a reviewed item schedule, sourced rails, matching stock, sale packs and incomplete quotes.
Choose your path
Turn separate measured faces of straight fixed-gap pickets or a reviewed whole-item schedule into complete cuts, explicit rail requirements and exact product purchases without inventing posts, gates, aesthetics or installation rules.
Keep separate faces and edge clearances from sharing an impossible fractional picket or stock remainder.
Enter every net rectangular picket face separately, using copies only for identical dimensions, gap and exact product.
Gets per-face positions and the final trimmed picket without automatic posts, gates or pooled rounding.
Distinguish simple equal-length fixed-gap components from scalloped, arched, alternating, profiled, sloped or prefab systems.
Use straight geometry only for the compatible component system; enter complex patterns/panels and independently designed rails as reviewed source lines.
Can audit cuts and stock without a fabricated 8 ft module, two-rail rule, post topology or universal spacing recommendation.
Reconcile matching stock, explicit spares, supplier packs and incomplete quotes for pickets, rails and other reviewed items.
Enter exact SKUs and sources, inspect unknown prices, and download only the current valid record.
Sees complete known/unknown purchase scope and original units without reading blanks as free or counting omitted components.
Outputs and checklists are planning aids. Review the linked current authorities and the records, terms, instructions, and requirements that apply to your exact situation before a consequential decision.
Tools you might need next
Build a fence material record from actual board dimensions, separate infill faces and reviewed rail or item schedules. Reconcile complete cuts, usable stock, sale packs and optional quotes.
Count fence posts from separate straight runs, reviewed maximum spacing and shared endpoint IDs. Reconcile gates, exact post SKUs, usable stock and whole sale packs.
Measure individual paint faces with their own openings and coats. Compare product-specific volume ranges, real containers, matching stock and optional cost.
Do not pool separate corners or openings. The written result exposes every face’s final trimmed picket; posts and gates are never inferred from length.
Each physical face is rounded independently from net width, exact picket face, fixed reviewed gap and explicit edge clearancesA picket cut longer than usable stock is rejected. No splice, pooled offcut or variable top pattern is invented by the straight geometry model.
Usable stock = source length − total end trim; complete pieces account for entered crosscut kerfEnter rail bays, rows and cuts only from the reviewed system. Use exact whole-item lines for scalloped, arched, alternating-length, profiled, stepped/racked or prefab systems, gates, posts and hardware.
Required stock + explicit spares − matching stock → whole supplier packsUpdated: August 2026
Enter left and right net picket faces separately after the reviewed gate opening. Each face gets its own final picket and stock allocation; gate/posts/hardware stay explicit schedule items.
Copy the actual picket face, reviewed gap, stock length, trims and kerf from the selected product/cutting record. Enter rail groups from the separate support layout rather than height.
Do not flatten variable lengths or an exact panel kit into one average picket formula. Enter its reviewed bill as exact whole-item SKU lines with stock, packs and quote coverage.
Build a source-owned picket-fence material record. Split net faces at gates, corners, height, pattern and product changes; use straight equal-length fixed-gap geometry only when it matches the selected component system, otherwise enter the reviewed whole-item schedule.