Reconcile measured hardwood areas, random-length inventory, actual carton coverage and whole-carton cost without assuming a fixed board count.
Choose your path
Reconcile a source-bearing multi-area hardwood takeoff, actual carton coverage and usable random-length inventory without an invented fixed board count.
Know what whole cartons actually deliver and cost.
Record measured rectangles and exclusions, enter the exact carton and explicit reserve, inspect delivered coverage and price.
Distinguishes need, purchased coverage and carton remainder without an automatic waste rule.
Credit only usable matching board coverage.
Choose measured same-width length bins, verify counts and usable lengths, then reconcile the carton order.
Does not count area inventory twice or mistake coverage for a workable cutting mix.
Keep source measurements and the quote basis traceable in a Project.
Change display units, edit one measured value, select the quote area unit, download and explicitly save/reload.
Original values/units and independent Hardwood provenance survive without converting currencies.
Outputs and checklists are planning aids. Review the linked current authorities and the records, terms, instructions, and requirements that apply to your exact situation before a consequential decision.
This tool is part of these guided projects. Each project provides step-by-step instructions with checklists and all the tools you need in one place.
Tools you might need next
Calculate a clean price-per-square-foot ratio from one documented price and area while retaining the area source, scope, and valuation limits.
Review laminate edge rows, starter lengths and joint spacing, then reconcile whole cartons, matching inventory and separately approved underlay.
Review fixed-plank vinyl rows and actual cartons, with separate product-approved click/floating or glue-down accessory quantities.
Keep each area non-overlapping and attached to one exact product and measured scope. Exclusions cannot exceed their rectangle.
Net area = sum(width × length − excluded area)Measured board bins and documented coverage are alternative inventory bases. Neither an average board length nor an area total proves that the available cutting mix works.
Usable inventory area = effective face width × sum(usable length × whole boards)Use the package label and explicit additional allowance. Per-area quotes charge all purchased carton coverage, not only the unrounded need.
Cartons = ceil(max(0, net area × (1 + allowance) + reserve − usable stock) ÷ actual carton coverage)Updated: August 2026
With zero additional allowance, 5 ft² reserve and no stock, 185 ft² need rounds to 9 cartons delivering 198 ft². At 60 per carton, flooring-only cost is 540 in the entered currency.
Twelve usable 48-inch boards and twelve 24-inch boards at 3.25-inch effective width supply 19.5 ft². The same 185 ft² demand then needs 8 cartons at 22 ft² each; cut suitability still needs review.
Name each measured rectangle, exclude only measured unfloored areas, choose the quote’s own ft² or m² basis and price all delivered coverage. Display-unit changes do not alter the raw measurements or quote basis.
Build one source-bearing hardwood takeoff from up to six non-overlapping rectangles. Choose documented area inventory or measured same-width boards of varying lengths. Reconcile an explicit allowance, repair reserve and real carton coverage before pricing every carton purchased.