Review fixed-plank vinyl rows and actual cartons, with separate product-approved click/floating or glue-down accessory quantities.
Choose your path
Reconcile uniform vinyl row geometry and whole-carton purchasing with an explicitly confirmed installation method and separate label-based accessory quantities.
Review a product-specific row plan without assuming another pad is allowed.
Confirm method, enter actual dimensions and starter cycle, inspect row flags, document no separate pad or approved roll coverage.
Does not treat a method choice or unflagged diagram as compatibility approval.
Quantify adhesive from the actual substrate, trowel and container coverage.
Switch method, re-enter cleared accessory assumptions, enter independent application area, spread range and whole stock.
Receives a whole-container range with no universal spread, cure or work-time claim.
Reproduce exact carton and accessory quotes with source ownership.
Check stock and reserve, test blank/invalid prices and unit changes, download and explicitly save/reload the Project record.
Unknown accessories remain unknown, all purchased planks are priced and other material records are unchanged.
Outputs and checklists are planning aids. Review the linked current authorities and the records, terms, instructions, and requirements that apply to your exact situation before a consequential decision.
This tool is part of these guided projects. Each project provides step-by-step instructions with checklists and all the tools you need in one place.
Tools you might need next
Calculate a clean price-per-square-foot ratio from one documented price and area while retaining the area source, scope, and valuation limits.
Review laminate edge rows, starter lengths and joint spacing, then reconcile whole cartons, matching inventory and separately approved underlay.
Reconcile measured hardwood areas, random-length inventory, actual carton coverage and whole-carton cost without assuming a fixed board count.
Use actual installed face dimensions and a declared starter cycle. The model flags short endpoints, narrow edge rows and close/aligned joints but does not approve the product or pattern.
Net field = (room width − 2 × clearance) × (room length − 2 × clearance)No fixed 20-plank carton or automatic pattern-loss percentage is used. A per-plank quote charges every plank in purchased cartons.
Cartons = ceil(max(0, ceil((positions − verified reuse) × (1 + allowance)) + reserve − stock) ÷ actual carton pieces)Floor the purchase at zero. Enter the exact container, substrate, trowel and label spread range. Click/floating underlay is a separate mode; changing method clears incompatible accessory assumptions.
Adhesive purchase range = ceil(application area with allowance ÷ high/low container coverage) − usable full containersUpdated: August 2026
Confirm that the exact product supports the entered method and layout. Review each row and either document the no-separate-pad instruction or quantify only a separately approved underlay.
For a separately measured 300 ft² application, zero allowance, 100–125 ft² per container and one usable container on hand, purchase two containers. At 40 each, adhesive-only cost is 80 in the entered currency.
For 350 ft² with the same coverage range and stock, purchase two to three containers. Do not turn the range into a guaranteed spread rate, working time, cure time or installation approval.
Keep vinyl geometry, purchase quantities and installation method distinct. Enter one fixed-plank field and sourced layout thresholds, review every row, then reconcile matching stock and real carton counts. Optional underlay or adhesive quantities depend on the exact approved product system.