Skip to content

Embroidery & Cross Stitch Calculator

Cross Stitch Calculator. Calculate cross stitch design finished size from stitch count and fabric count (Aida/Linen). Convert between 14, 16, 18, and 28-count fabrics.

Use this result well

Inputs that matter
Stitch Width, Stitch Height, Fabric Count
Output to expect
Cross Stitch Design Size
  • Check the units and required inputs before comparing results.
  • Keep the assumptions with a copied result so you can reproduce the calculation later.
Was this tool helpful?

Related Tools

Tools you might need next

Embroidery Thread Calculator

Estimate embroidery floss and thread quantity for cross stitch and hand embroidery projects. Skein count from stitch count and colors.

Recommended next stepEmbroidery
Fabric Count Calculator

Convert embroidery fabric count between Aida, evenweave, and linen systems. Calculate equivalent counts for over-1 and over-2 stitching.

Recommended next stepEmbroidery
Pattern Resize Calculator

Resize cross stitch and embroidery patterns across different fabric counts. Convert stitch counts and finished dimensions proportionally.

Recommended next stepEmbroidery

Reference & details

How it works

Finished Size

Divide stitch count by fabric count (holes per inch). A 140×200 stitch design on 14-count Aida finishes at 10×14.3 inches.

Size (in) = Stitches ÷ Fabric count

Fabric Count Conversion

Same design on higher count fabric finishes smaller. Moving from 14 to 28 count halves each dimension.

New size = Original size × (Old count ÷ New count)

Fabric Allowance

Add 3 inches minimum margin on all sides for framing and hoop clearance. Large designs may need 4–6 inches.

Fabric needed = Design size + 3 inches each side

Updated: July 2026

Example Scenarios

Design finishes at 8.75×12.5 inches. Order 15×19 inch fabric piece with 3-inch margins for 12×16 frame.

Target 8×10 inch finished size for 140-stitch width design requires 17.5-count fabric — use 18-count and accept 7.8 inch width or adjust design.

Sampler with 300×400 stitches on 14-count yields 21.4×28.6 inches — verify wall space before starting year-long project.

FAQ

Fabric count is holes (or threads) per inch. 14-count Aida has 14 holes per inch. Higher count = smaller finished size and finer detail. 28-count linen stitched over 2 equals 14-count size.

Minimum 3 inches on each side for framing and hoop movement. Large projects and Q-snap frames may need 4–6 inches. Never start stitching at fabric edge.

Stitching over 2 on evenweave/linen: divide fabric count by 2 for equivalent Aida count. 28-count linen over 2 = 14-count Aida equivalent.

Yes. Higher count = smaller finished piece. Same design on 18-count vs 14-count is 78% of the size. Verify legibility of fractional stitches on high counts.

Use the Embroidery Thread Calculator. Rule of thumb: 1 skein DMC covers ~18 inches of 14-count single-strand stitching per 100 stitches in one direction.

About Cross Stitch Calculator

Cross stitch finished size depends on stitch count and fabric count (holes per inch). Enter design dimensions in stitches and fabric count to calculate finished size in inches and centimeters, or reverse-calculate fabric count needed for a target finished dimension.