Skip to content

Pattern Resize Calculator

Resize cross stitch and embroidery patterns across different fabric counts. Convert stitch counts and finished dimensions proportionally.

Use this result well

Inputs that matter
Original Fabric Count, Original Stitch Width, Original Stitch Height, Target Fabric Count
Output to expect
Cross Stitch Pattern Resize
  • Check the units and required inputs before comparing results.
  • Keep the assumptions with a copied result so you can reproduce the calculation later.
Was this tool helpful?

Related Tools

Tools you might need next

Cross Stitch Calculator

Calculate cross stitch design finished size from stitch count and fabric count (Aida/Linen). Convert between 14, 16, 18, and 28-count fabrics.

Recommended next stepEmbroidery
Fabric Count Calculator

Convert embroidery fabric count between Aida, evenweave, and linen systems. Calculate equivalent counts for over-1 and over-2 stitching.

Recommended next stepEmbroidery
Blast Pattern Calculator

Estimate blast burden and spacing from blast hole diameter (D in inches). Free blast pattern calculator for blast, pattern, and more.

Mining

Reference & details

How it works

Cross-Count Resize

Moving from 14 to 18 count reduces finished size — multiply stitch count by 14/18 to maintain same inches. Results in fractional stitches at edges.

New stitches = Original stitches × (New count ÷ Old count)

Dimension Target Resize

Multiply all stitch counts by scale factor. Non-integer stitch counts require rounding or design modification.

Scale factor = Target size ÷ Current size

Aspect Ratio Preservation

Uniform scaling preserves proportions. Non-uniform scaling distorts the design — avoid unless intentionally adapting to specific space.

Scale X and Y by same factor (uniform)

Updated: July 2026

Example Scenarios

200×280 stitch design on 14-count (14.3×20 in) resized to 18-count equivalent keeps same size with finer detail — no stitch count change, just fabric swap.

Scale 140×140 design by 0.5× to 70×70 stitches for 5×5 inch ornament on 14-count — verify small text remains legible.

Need 8-inch width from 200-stitch design: required count = 200÷8 = 25-count equivalent — use 28-count over 2 (14 effective) and accept 14.3 inch width or trim design.

FAQ

Geometric and floral patterns resize well. Text, faces, and fine detail may become illegible when scaled down below 50%. Scaling up always works if fabric count increases.

Non-integer stitch counts create partial stitches at edges. Round to nearest whole stitch and adjust border, or use software (PCStitch, WinStitch) for automatic conversion.

Changing count without changing stitches changes finished size. To maintain size on higher count, you need more stitches — effectively a larger pattern.

PCStitch, WinStitch, and Stitch Fiddle import patterns and resize with automatic stitch regeneration. Manual calculation works for simple scale factors.

Yes. Larger designs (more stitches) need more thread. Scale thread estimates by the square of the linear scale factor (2× size = 4× thread approximately).

About Pattern Resize Calculator

Found the perfect pattern but need a different finished size? Convert pattern dimensions between fabric counts or scale stitch count proportionally while maintaining design aspect ratio.