Heat Pump Conversion Planning

Simple in-browser notepad with auto-save. Write quick notes that persist in your browser. Download as text file. No signup needed.

Total entered assembly heat losses, sensible outdoor-air loss and explicit additional loads for a documented heating subtotal.

Compare a documented design heating load with actual equipment output at the same relevant design conditions, retaining the source for both.

Compare documented total and sensible cooling loads with matched equipment capacities and show the implied latent differences.

Calculate EER, COP and kW per ton from matched cooling output and input, or retain separately documented seasonal and full-load ratings.

Compare the same entered heating demand using explicit equivalent full-load hours, seasonal heat-pump efficiency, furnace AFUE, tariffs and other annual costs.

Build an installed quote, compare lifetime costs and calculate material packs. Separate payment-day cash from later reimbursements using your project records.

Build a complete monthly household plan with annual bills and savings, or follow dated transactions to find early shortfalls and extra opening cash needs.

Calculate an entered utility bill reduction and simple payback, or compare observed bill averages without assuming what caused the change.

Calculate ACH from documented flow and volume while keeping operating outdoor or supply airflow separate from a stated pressure-test result.

Normalize comparable duct pressure-test records or model sensible transfer and electric cost using separately supported operating leakage assumptions.

Calculate CFM from an explicit air-change target or sensible load, then compare design and measured room airflows without hiding individual deficits.

Model a daily moisture mass balance from dry-air flow and humidity ratios, then compare assessed removal needs with documented equipment capacity.

Calculate service dates from documented intervals or compare actual runtime readings with a service threshold, then save and export the record.

Compare a documented blower airflow and external-static point with the stated design airflow band and pressure limit, retaining signed margins.

Calculate geometric duct area, check actual clear-dimension velocity and reconcile fan pressure, component losses and an equivalent duct path.

Estimate heating and cooling electricity from documented thermal loads, equivalent seasonal hours, seasonal efficiency ratings and an entered tariff.