Outlet Layout and Installation Planning

Generate positions on actual eligible wall spans, then check measured receptacle coordinates for uncovered gaps using a documented reach rule.

Simple in-browser notepad with auto-save. Write quick notes that persist in your browser. Download as text file. No signup needed.

Map actual GFCI devices and downstream outlets, record tests and expose unknown requirements without inventing circuit or device counts from rooms.

Count unique planned AFCI and dual-function breakers from reviewed circuits, retaining approved alternative protection and unresolved decisions.

Reconcile documented split-phase demand categories and per-leg current, then count actual panel spaces and circuits in a separate inventory.

Compare copper and aluminum chart sizes using required ampacity, correction factors, terminal ratings and protection limits; save the full basis.

Compare actual breaker catalog ratings with weighted circuit current and verified conductor or equipment limits; identify when no candidate fits.

Calculate DC path drop or approximate single-phase and balanced three-phase AC drop using actual conductor data, circuit current and a chosen limit.

Build an installed quote, compare lifetime costs and calculate material packs. Separate payment-day cash from later reimbursements using your project records.

Plan continuous cable cuts from a specified circuit route, actual slack and parallel cable counts, then allocate stock rolls and quoted cost.

Compare mixed insulated conductors or cables with full raceway internal areas; apply the ordinary count-based fill limit once and screen candidates.

Compare complete fan weight, additional accessories and the manual’s minimum support rating with a documented mounting assembly and compatibility.

Check actual lamp or driver W/VA, load range, lamp counts and compatibility against the exact dimmer’s documented load-type and ganging limits.

Check configured EVSE AC current against ordinary circuit limits, then estimate charging energy and time using vehicle acceptance and efficiency.

Compare documented feeder ampacity and actual AC impedance, recalculate voltage drop for every conductor and identify when no candidate fits.

Plan a centered grid from luminaire spacing criteria and height above the work plane; get fixture counts, pitch, offsets and actual coordinates.

Allocate indivisible lighting groups to proposed circuits using actual input VA and continuous-load weighting; show a feasible plan or oversized groups.

Compare actual running W/VA and simultaneous starting events with generator continuous, temporary and duration ratings; show candidates that fit.

Compare actual transfer-switch normal and generator current-path ratings with a documented service or selected-load design and save the basis.

Model an isolated vertical rod in homogeneous soil, explore a bounded target depth and compare actual tests with uncertainty and a chosen threshold.